Camera trap with solar panel PIE1058

• Multi-operator SIM card provided:
• The SIM card is already installed in the device when you purchase the device
• You can choose from 5 photo and video transmission plans, including one FREE (4 monthly plans with no commitment, 1 yearly plan)
• Multi-operator card: the device searches among different available networks for the strongest signal. For France, the searched networks are Orange, Bouygues Telecom, and SFR.
• The device only works with the provided SIM card.
• Photos or video previews are sent to a Cloud storage space:
• Your Cloud is accessible at any time from the free mobile app (iOS/Android - app name: PIE Cloud)
• Resolution of photos sent to the Cloud: 640 x 480 pixels
• Video previews: previews lasting 3 seconds created from more than 10 photos
• Possibility to receive on demand:
• HD photos (1920 x 1440 pixels)
• HD videos (720P - duration: 10 seconds - 30 FPS)
• In the Cloud, you can filter your photos/videos using tags:
• A list of predefined tags is available in the app (wild boar, human, vehicle, etc.)
• You also have the option to create your own tags
• Shooting angle: 60°
• PIR sensor (motion detector):
• Detection angle: 60°
• Detection distance: about 20 m
• Adjustable detection sensitivity: low | medium | high
• Infrared flash:
• 60 invisible black LEDs
• Range: about 20 m
• Option to disable part of the LEDs:
• helps avoid overexposed night photos/videos
• useful if you want to place the device near the subject to photograph/film
• Automatic infrared flash activation based on light conditions
• Adjustable night mode: longer or shorter exposure can increase or decrease the range of the infrared flash
• Capture modes:
• Photo: 1 to 2 photos per trigger
• Video with audio: 10 seconds duration
• Photo + Video with audio: one photo followed by a video taken each time a trigger is activated
• Photo resolution: 8 MP | 12 MP | 24 MP
• Photo file format: JPEG
• Video resolution: HD 720P
• Video file format: MOV
• Ability to set and trigger the device remotely via the free app (iOS/Android - app name: PIE Cloud)
• External antenna provided:
• allows better reception in areas with little network
• antenna height: 22 cm - cable length: 2 m - magnetic base
• PIR detection mode: the device takes photos and/or videos when the passive infrared sensor (PIR) detects activity in the area it covers
• Time Lapse mode: photos and/or videos are automatically taken at regular intervals
• Built-in GPS antenna allowing geolocation of photos
• Photo markings: time, date, temperature, lunar phase, device identification number, battery level, GPS coordinates of the photo
• Memory: SD or micro SD card with adapter from 4 GB to 32 GB, class 10 minimum (not provided). You can purchase micro SD cards with adapter at any time on this site.
• Loop recording on memory card:
• User programmable: ON/OFF
• When the memory card is full, the camera will record new photos/videos by deleting the oldest ones.
• Programmable device identification number: allows you to identify where and by which device a photo was taken, which can be very useful if you have multiple devices.
• Programmable password

Reliable and efficient

• Designed to withstand the elements (IP66)
• Trigger speed: about 0.35 seconds

Ergonomics of the cellular camera trap PIE1058

• Weight: 418 g (without batteries) - 696 g (with batteries)
• Dimensions: 148 x 116.5 x 75.5 mm
• External antenna provided
• Power supply: 12 AA batteries (alkaline or rechargeable Ni-MH - not provided) - You can purchase these batteries at any time on this website.
• 2.4-inch RGB 262 k colour TFT screen: to facilitate settings and view photos and videos
• USB port for downloading recorded files from the memory card

Below are tips for installing your camera trap in the field:

• Install the device about 1.5 m/2 m off the ground, orienting it slightly downward.
• Position the device facing north or south. Do not face the device east or west as sunrise and sunset can cause false triggers and produce overexposed images.
• To monitor a game trail, point the device along the trail rather than perpendicularly. This allows multiple animals to be seen at once if they pass in line.
• Avoid placing the device on a weak tree that may sway in strong winds. Try to place the camera on a stable and fixed support.
• Clear branches or grasses in front of the device. In strong winds or high temperatures, they could cause false triggers.
• Check the state of the batteries before setting up the device.
• Make sure the memory card is properly inserted.
• Check that the date and time are correct.
• Remember to set the selector to "ON" before you leave.

To find out the prices of photo and video transmission plans, CLICK HERE.

To find out the operators and countries covered by the provided SIM card, CLICK HERE.

Features of the SOL1072 solar panel

• Output cable length of 2.50 m
• Built-in battery: 2 lithium 18650 3.7V / 5200 mAh batteries
• Maximum output power of the solar panel: 3 W
• Output voltage: 6V-9V-12V
• External charge input: DC 5 V/2000 mA
• Charging methods:
• Using solar energy
• Using the power supply + USB cable (not provided, sold as accessories)
• Full charge time:
• 24 hours for a solar charge
• 4 hours for a charge with a 5V/2A adapter (charging the solar panel with Type-C output)
• Charging indicator:
• Red light: fast charge (charge level > 3 V)
• Red and green flashing: slow charge (charge level < 3 V)
• Green light: fully charged

Ergonomics of the SOL1072 solar panel

• Dimensions: 173 mm x 120 mm x 35 mm
• Weight: 338 g
• Waterproof (IP66)