Wi-Fi camera trap PIE1077

The Wi-Fi function allows you to remotely and via the free app:

to view, download, or delete saved photos and videos


to take photos or videos
to change the product settings
to check the remaining battery and memory capacity


Name of the free app: TrailCam Go (available on Android and iOS)


The device creates its own Wi-Fi network, there's no need to be near a box.


The Wi-Fi function is activated via Bluetooth from a smartphone.
PIR sensors (motion and heat detectors)

1 central sensor + 2 side sensors
Wide detection angle: 120° in total | Central PIR sensor: 90°
Detection distance: about 20 m
Adjustable detection sensitivity: Low | Medium | High


Invisible infrared flash for night photos and videos



34 invisible black LEDs
Wavelengths: 940 nm
Adjustable infrared flash range: Short | Medium | Long
Maximum flash range: about 20 m
Infrared flash automatically activated based on lighting conditions


Field of view: 84°
Trigger speed: 0.3 seconds
3 capture modes



Photo: from 1 to 5 photos per trigger
Video: programmable duration from 5 seconds to 10 minutes | Programmable audio recording
Photo + Video: one photo then a video are taken at each trigger


Photo resolution: programmable up to 48 MP
Photo file format: JPG
Video resolution: programmable up to 4K
Video file format: AVI
3 operating modes

Motion detection mode: the device takes photos or videos when the PIR sensors (motion/heat detectors) detect activity in the area they cover.
Time Lapse mode: photos or videos are taken automatically at user-defined regular time intervals. In this mode, the PIR sensors are disabled (no motion/heat detection). If the user sets the interval to 30 minutes, the device will automatically take a photo or video every 30 minutes.
Time Lapse + video mode: the device automatically takes photos at user-defined regular time intervals and then generates a video from the photos taken. In this mode, the PIR sensors are disabled (no motion/heat detection). If the user sets the interval to 30 minutes, the device will automatically take a photo every 30 minutes.


Operating period: programmable - The device can operate 24/7 or only during a time frame defined by the user.
Timestamp on photos: programmable - If the setting is turned ON, the following information will be printed at the bottom of the photos: date and time of the photo, ambient temperature, lunar phase, battery level, and camera name (if the user has programmed one).
Memory: micro SD card with a maximum capacity of 512 GB, minimum class 10 (not provided). You can purchase micro SD cards anytime on this website.
Device name: programmable - Very useful for users who have multiple devices as it helps identify which device (and thus where) a photo was taken.
Password: programmable
Loop recording function: programmable - If the setting is turned ON, when the memory card is full, the camera continues to record new photos/videos by deleting the oldest photos/videos.