Glue Magnet Cyanocrylate

General-purpose Cyanoacrylate 401. Dries quickly, very strong, low viscosity, specially formulated for bonding materials that may even have an acidic surface. Can be used with rubber, leather, wood, metal, resin, and plastic. The surfaces to be joined must be free of dirt, dust, and grease. A small amount of glue should be applied; using more cyanoacrylate does not guarantee better adhesion and makes the drying of the adhesive less effective for bonding.

• 99% Cyano.
• Ethyl cyanoacrylate
• Operating temperature: -55º to 120º
• Setting time: between 3 and 10 seconds. Gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10 to 30 seconds will ensure better adhesion.
• Final curing time: 24 h
• Viscosity: 110 mPa.S
• Shear strength: 21.0 MPa